Article

How do I change the wristband on my Fitbit device?

« Go Back

Information

 
Article Text
Certain Fitbit devices can be customized with interchangeable wristbands. 
Choose your device for more information.

Fitbit Ace, Fitbit Alta, and Fitbit Alta HR have 2 detachable wristbands (top and bottom) that you can replace with accessory wristbands sold separately. To remove and replace a wristband:

  1. Turn over your tracker and find the wristband latches—there’s one on each end where the wristband meets the frame.
  2. To release a latch, press down on the flat metal button on the strap.
    User-added image 
  3. Slide the wristband up to release it from the tracker.
    User-added image
  4. Repeat on the other side. If you’re having trouble or if it feels stuck, gently move the wristband back and forth to release it.
  5. To attach a wristband, slide it down on the end of the tracker until you feel it snap into place.
    User-added image

To see these steps in action, watch the following video (English only).

Fitbit Blaze has detachable top and bottom wristbands that you can replace with accessory wristbands sold separately. To remove and replace a wristband:

  1. Place Blaze facedown on a flat, smooth surface. You can tell it is face down when two buttons are on the left and one button is on the right.
  2. On either side (top or bottom), find the switch where the wristband meets the frame.
  3. Use your finger or nail to unlock the switch by gently sliding it to the opposite end. Pull the wristband away from the frame.
    User-added image
  4. Grasp the wristband you want to attach, making sure you choose the right one (top or bottom). The top band has a watch buckle at the end of it. The bottom band has notches.
  5. To attach the wristband, find the pin opposite the removal switch and slide it into the hole in the frame.
  6. Pull the switch while sliding the wristband into place, then release the switch to lock the wristband into the frame.
  7. Repeat on the other side.

To see these steps in action, watch the following video (English only).

Fitbit Ace 2 has an adjustable wristband that you can replace with accessory wristbands sold separately. For larger sizes or different styles, Ace 2 is compatible with Inspire series classic accessory wristbands.

To remove the wristband:

  1. Hold the tracker with the screen facing you and the button on the left.
  2. Gently push the top of the tracker through the back opening in the wristband.


User-added image

To attach a wristband:
  1. Hold the tracker with the back facing you and the button on the right.
  2. Hold the wristband with the back opening facing you and the button insert on the right.
  3. Place the top of the tracker into the flexible wristband opening and gently push the bottom of the tracker into place. Ace 2 is secure when all edges of the wristband lie flat against the tracker.


User-added image

Fitbit Charge 2 and Fitbit Charge 3 have 2 detachable wristbands (top and bottom) that you can replace with accessory bands sold separately. To remove and replace the bands on both sides:

  1. Turn over your tracker and locate the two wristband latches—there’s one on each end where the wristband meets the frame.
  2. To release a latch, press down on the flat button on the strap.​
    User-added image
  3. Gently pull the wristband away from the tracker to release it.​
    User-added image
  4. Remove the wristband on the other side. If you’re having trouble or if it feels stuck, gently move the wristband back and forth to release it.
  5. To attach a wristband, slide it on the end of the tracker until you feel it snap into place, then repeat on the other side. If you have trouble attaching the wristband or if it feels loose, gently move the wristband back and forth to make sure it is attached to the tracker. 
               User-added image

Fitbit Flex 2 comes with a large and a small wristband. If you choose the large wristband, you’ll need to remove the clasp from the small wristband and put it into the large wristband:

  1. Push the clasp out from the inside of the wristband. You may find it helpful to first remove the square peg and then the round peg.
  2. Pull out the clasp.
  3. Insert the clasp into another wristband by lining up the pegs with their matching holes and pressing firmly until both pegs snap into place.
    User-added image
  4. If there is a bulge on the inside of the wristband, find a small object like a credit card to push it flat.

To put the pebble into a wristband, hold it in your hand with the back facing up. Find the dot on the back of the pebble and insert that end where you see a corresponding dot on the wristband.
User-added image

For instructions on how to put on the wristband, see How do I wear my tracker?

To see these steps in action, watch the following video (English only).

Fitbit Inspire and Fitbit Inspire HR have 2 detachable wristbands that you can replace with accessory wristbands sold separately. Note that to switch between small and large wristbands, only the replace the bottom wristband.

To remove the wristband:

  1. Turn over Inspire and find the quick-release lever.
  2. While pressing the quick-release level inward, gently pull the wristband away from the tracker to release it.
 User-added image .    User-added image
  1. Repeat on the other side.


To attach a new wristband:

  1. Slide the pin (the side opposite the quick-release lever) into the notch on the tracker. Attach the wristband with the clasp to the top of the tracker.
User-added image
  1. While pressing the quick-release lever inward, slide the other end of the wristband into place.
User-added image
  1. When both ends of the pin are inserted, release the quick release lever.

Ionic has two detachable wristbands (top and bottom) that you can replace with accessory wristbands sold separately. To remove and replace a wristband:

  1. Turn Ionic over and find the wristband latches—there’s one on each end where the wristband meets the frame. 
  2. To release the latch, press down on the flat metal button on the strap.
    User-added image
  3. Gently pull the wristband away from the watch to release it.
    User-added image
  4. Repeat on the other side. If you have trouble removing the wristband or if it feels stuck, gently move the wristband back and forth to release it.
  5. To attach a wristband, press it into the end of the watch until you feel it snap into place. The wristband with the clasp attaches to the top of the watch.
    User-added image
To see these steps in action, watch the following video (English only):

Fitbit Versa series has two detachable wristbands (top and bottom) that you can replace with accessory wristbands sold separately. Note that to switch between small and large wristbands, only replace the bottom wristband.

To remove and replace a wristband:

  1. Turn your watch over and find the quick-release lever. 
  2. While pressing the quick-release lever inward, gently pull the wristband away from the tracker to release it. 
 User-added image     User-added image
  1. Repeat on the other side.
  2. To attach a wristband, hold the band at a 45° angle and slide the pin (the side opposite the quick-release lever) into the notch on the watch. Attach the band with the clasp to the top of the watch.
     User-added image     User-added image
  3. While pressing the quick-release lever inward, slide the other end of the wristband into place.
    User-added image
  4. When both ends of the pin are inserted, release the quick-release lever.
To see these steps in action, watch the following video (English only):
Last updated: September 9, 2019
I found this article helpful I found this article helpful

I did not find this article helpful I did not find this article helpful

Employee Wellness & Health Plan Members

Log in for exclusive customer support


Get Support

Find strength in numbers

Expert advice to the latest news. It’s all here.

Let's talk

Get Support